Alternating Current

An alternating current is represented by the equation, i = 100 2 (100 t) ampere. The RMS value of current and the frequency of the given alternating current are

1. 100 2 A, 100 Hz
2. 50 2 A, 50 Hz
3. 100 2 A, 100 Hz
4. 100 A, 50 Hz

An inductor of self inductance 1 H is connected in series with a resistor of 100 ohm and an ac supply of 100 volt, 50 Hz. Maximum current flowing in the circuit is A.

An electric bulb rated as 100 W - 220 V is connected to an ac source of rms voltage 220 V. The peak value of current through the bulb is:

1. 0.32 A
2. 0.64 A
3. 0.45 A
4. 2.2 A

Given below are two statements: one is labelled as Assertion (A) and the other is labelled as Reason (R). In the light of the above statements, choose the most appropriate answer from the options given below :

1. (A) is true but (R) is false
2. Both (A) and (R) are true and (R) is the correct explanation of (A).
3. Both (A) and (R) are true but (R) is not the correct explanation of (A)
4. (A) is false but (R) is true

An alternating current is given by I=IA t+IB t. The r.m.s current will be

1. IA2+IB22
2. IA2+IB22
3. |IA+IB| 2
4. IA2+IB2

In a series LCR circuit, a resistor of 300 , a capacitor of 25 nF and an inductor of 100 mH are used. For maximum current in the circuit, the angular frequency of the ac source is 104 radians s-1

A series LCR circuit is connected to an alternating source of emf E. The current amplitude at resonant frequency is I0. If the value of resistance R becomes twice of its initial value then amplitude of current at resonance will be

1. I02
2. I0 2
3. 2I0
4. I0

A bulb and a capacitor are connected in series across an ac supply. A dielectric is then placed between the plates of the capacitor. The glow of the bulb :

1. becomes zero
2. remains same
3. increases
4. decreases

When a coil is connected across a 20 V dc supply, it draws a current of 5 A. When it is connected across 20 V, 50 Hz ac supply, it draws a current of 4 A. The self inductance of the coil is mH. (Take = 3)

A capacitor of reactance 4 3 and a resistor of resistance 4 are connected in series with an ac source of peak value 8 2 V. The power dissipation in the circuit is W.