Atomos Test Generator Free PYQs ExamsMy practice Log in / Sign up free

Thermal Properties of Matter

JEE Main 2026 (Online) 24th January Morning ShiftMCQEasy📈 Topic in 11% papers+4−1
Ques. 1JEE Main 2026, 24 January (Morning Shift)

A brass wire of length 2 m and radius 1 mm at 27 C is held taut between two rigid supports. Initially it was cooled to a temperature of -43 C creating a tension T in the wire. The temperature to which the wire has to be cooled in order to increase the tension in it to 1.4T, is C.

  1. -71
  2. -80
  3. -65
  4. -86

Answer

(1) -71

Solution

Thermal tension in a wire fixed between rigid supports: T = YA

T (fall in temperature from 27 C)

First cooling: 1 = 27 - (-43) = 70 C gives tension T

for 1.4T: 2 = 1.4 70 = 98 C

final temperature = 27 - 98 = -71 C

Answer: (1)

Keep practising — Thermal Properties of Matter

Ques. 2JEE Main 2026, 24 January (Morning Shift)

A gas of certain mass filled in a closed cylinder at a pressure of 3.23 kPa has temperature 50 . The gas is now heated to double its temperature. The modified pressure is Pa.

Ques. 3JEE Main 2026, 23 January (Evening Shift)

An air bubble of volume 2.9 cm3 rises from the bottom of a swimming pool of 5 m deep. At the bottom of the pool water temperature is 17 . The volume of the bubble when it reaches the surface, where the water temperature is 27 , is cm3. (g = 10 m/s2, density of water = 103 kg/m3, and 1 atm pressure is 105 Pa)

  1. 2.0
  2. 4.2
  3. 3.0
  4. 4.5
Ques. 4JEE Main 2026, 22 January (Morning Shift)

Rods x and y of equal dimensions but of different materials are joined as shown in figure. Temperatures of end points A and F are maintained at 100 and 40 respectively. Given the thermal conductivity of rod x is three times of that of rod y, the temperatures at junction points B and E are (close to): [figure]

  1. 60 and 45 respectively
  2. 80 and 70 respectively
  3. 89 and 73 respectively
  4. 80 and 60 respectively
Ques. 5JEE Main 2026, 21 January (Morning Shift)

An aluminium and a steel rod having same lengths and cross-sections are joined to make total length of 120 cm at 30 . The coefficients of linear expansion of aluminium and steel are 24 10-6/ and 1.2 10-5/ , respectively. The length of this composite rod when its temperature is raised to 100 , is cm.

  1. 120.20
  2. 120.06
  3. 120.15
  4. 120.03
Ques. 6JEE Main 2026, 21 January (Morning Shift)

A gas based geyser heats water flowing at the rate of 5.0 litres per minute from 27 to 87 . The rate of consumption of the gas is g/s. (Take heat of combustion of gas = 5.0 104 J/g, specific heat capacity of water = 4200 J/kg C)

  1. 4.2
  2. 2.1
  3. 0.21
  4. 0.42
Ques. 7JEE Main 2025, 8 April (Evening Shift)

Water falls from a height of 200 m into a pool. Calculate the rise in temperature of the water assuming no heat dissipation from the water in the pool. (Take g = 10 m/s2, specific heat of water = 4200 J/(kg K))

  1. 0.36 K
  2. 0.23 K
  3. 0.48 K
  4. 0.14 K
Ques. 8JEE Main 2025, 7 April (Morning Shift)

A wire of length 10 cm and diameter 0.5 mm is used in a bulb. The temperature of the wire is 1727 and power radiated by the wire is 94.2 W. Its emissivity is x8 where x = . (Given = 6.0 10-8 W m-2 K-4, = 3.14 and assume that the emissivity of wire material is same at all wavelengths.)

Ques. 9JEE Main 2025, 7 April (Evening Shift)

Two cylindrical rods A and B made of different materials, are joined in a straight line. The ratios of lengths, radii and thermal conductivities of these rods are: LALB = 12, rArB = 2 and KAKB = 12. The free ends of rods A and B are maintained at 400 K, 200 K, respectively. The temperature of rods interface is K, when equilibrium is established.

Ques. 10JEE Main 2025, 4 April (Evening Shift)

Consider a rectangular sheet of solid material of length l = 9 cm and width d = 4 cm. The coefficient of linear expansion is = 3.1 10-5 K-1 at room temperature and one atmospheric pressure. The mass of sheet m = 0.1 kg and the specific heat capacity Cv = 900 J kg-1 K-1. If the amount of heat supplied to the material is 8.1 102 J then change in area of the rectangular sheet is :

  1. 2.0 10-6 m2
  2. 6.0 10-7 m2
  3. 3.0 10-7 m2
  4. 4.0 10-7 m2
Ques. 11JEE Main 2025, 3 April (Evening Shift)

Pressure of an ideal gas, contained in a closed vessel, is increased by 0.4\% when heated by 1 . Its initial temperature must be:

  1. 2500 K
  2. 25
  3. 250
  4. 250 K

All Thermal Properties of Matter PYQs →

PDFDownload Thermal Properties of Matter PYQs as PDF Free, with answer key and a QR code to every solution — print it or study offline⬇
All JEE Main Physics chapters